IntelliTouch Music on Hold Player

IntelliTouch Music on Hold Player

Revoluttionary digital music-on-hold playback system supports MP3 and WMA audio formats. The unit has 64mb of on board memory preloaded with over 4 hours of great sounding licensed music content, so it's ready to go right out of the box. Add new content to the player by connecting to a PC via the USB port or just slip in a SD Card with new content. By adding a 1GB SD card, you can increase the playback time to over 70 hours!

Features

USB connection
Connect to your PC via USB to add new content or update firmware.
PC connection...strictly optional
Unit uses PC only to update content stored in flash memory. Updated content can optionally be added by copying an MP3 or WMA audio file to a SD Card without the unit ever being connected to a PC or network.
MessageStudio software
Allows users to create new on-hold audio content with voice and music on their PC with a few mouse clicks. Then, just transfer the file directly to the unit’s on-board memory, to a SD Card, or upload to a server for a network update.
Auto start after power loss
Retains stored preferences such as: music selection, repeat mode and volume settings. If power to the unit is lost, unit immediately returns to continuous playback with all settings without human intervention.
LCD Control Panel
6 line backlit LCD panel displays ID-3 tags with descriptive names of tracks for easy identification and selection. Display also shows a variety of important information so user can choose playback preferences and easily determine unit's operational status.
Flash memory
64MB of on-board flash memory stores over 228 minutes of awesome sounding content. Additional SD Cards (not included) can add over 70 hours (with a 1GB SD card).
Ready to go right out of the box
Pre-loaded with several files containing great sounding music mixed with intermittent "thanks for holding" messages. Just plug it in and walk away. Anything else is completely optional.
Free personalization
A free professionally voiced, personalized on-hold production is provided to the customer automatically when a product is registered.

hover to enlarge

OHP 6000 Diagram
OHP 6000 Diagram

Specifications

Player/Recorder
- On-board memory - 64MB
- Maximum Memory Supported – 1GB
- Supported audio standards – MP3 and Microsoft Windows® Media (WMA) digital music
- Supported bit rates – 32 – 196kbps
- External Memory Slot – Secure Digital Card (SD)
- Interface – USB 1.1
- Playback modes – repeat one, repeat all, repeat all shuffle
- Audio output mode – mono (analog)
- ID-3 tag support
- Firmware upgradeable via USB or web connection
- LCD - 6 line backlit display
- Built-in monitor speaker
- Interface devices - USB port, RCA audio output, 2.5mm Power jack
- Software included - MessageStudio v.3 - Windows (Mac requires Virtual PC v3.0 or later)
- Minimum operating system (required only if loading audio directly to player via USB connection)
  
  Windows - 98, 98 ME & SE, 2000, XP
  Mac - OS 9.0.4 or later, OS X 10.1 or later
- Warranty - 3 Year
Analog Audio Output
- 8 ohm: 4 volts peak to peak
- 600 ohm: 8 volts peak to peak
Controls/Switches
- Power on/off
- Play/pause
- Volume up/down
- Skip up/down
- Repeat mode
- Monitor speaker on/off
- Impedance 8ohm/600ohm
Power
- 9VDC @500mA
- Source -110VAC, 60Hz UL/CSA power pack
Physical
- Size: 9" x 7" x 2.25" (LWD)
- Weight: 3 lbs
- Wall mountable
Includes
- Digital Player/Recorder
- MessageStudio Software
- USB Cable
- Audio Connector Cable
- AC Power Adapter

For More Information

Call Us at 1-800-544-4627, or send an email info@dcninc.com